PMA 10.5" SBR Upper with 9" Matrix Rail

Pickett's Mill Armory 10.5" M4 Upper Receiver is a flat top, drop in receiver, ready to be mounted to any Mil-Spec AR-15 lower receiver! This fully mil-spec compliant receiver provides a high-quality upper for any shooter. The assembled item comes with the following items: Upper Receiver, Forward Assist, Ejection Port Door, Barrel Nut. 10.5" M4 Profile Barrel and A2 Flash Hider. Bolt Carrier Group and Charging Handle are additional and are offered at discounted prices in the drop down menus.

10.5" Contoured Steel Barrel

4150 Chrome Moly

.223 Wylde Chamber (Safe for use with 5.56)

HPT/MPI

M4 Feed ramps

Low Profile Steel Gas Block

Stainless pistol-length gas tube

Direct Gas Impingement

Mil-spec A2 Flash Hider

Thin profile Free Float 9" Hand Guard with

Forged Upper Receiver with Forward Assist, Ejection Door and Shell Deflector

PMA 16" AR15 Upper Receiver 11" Keymod Rail

The Pickett's Mill Armory 16" M4 Chrome Moly Upper Receiver is a flat top, drop in receiver, ready to be mounted to any Mil-Spec AR-15 lower receiver! This fully mil-spec compliant receiver provides a high-quality upper for any level budget or shooter. Comes complete and assembled with Upper Receiver, Forward Assist, Ejection Port Door, Barrel Nut. 16" M4 Profile Barrel and A2 Flash Hider. Bolt Carrier Group and Charging Handle are available at additional cost.

16" M4 Profile 4150 Chrome Moly Vanadium 1 in 9" twist rate

5.56 Nato Chamber

HPT/MPI

M4 Feed ramps

Low Profile Steel Micro Gas Block

Stainless carbine-length gas tube

Direct Gas Impingement

Mil-spec A2 Flash Hider

11" Free Float Keymod Rail

Forged Upper Receiver with Forward Assist, Shell Deflector

PMA 7.5" M4 Keymod Rail Pistol Upper .223 / 5.56

Pickett's Mill Armory 7.5" M4 Upper Receiver is a flat top, drop in receiver, ready to be mounted to any Mil-Spec AR-15 lower receiver! This fully mil-spec compliant receiver provides a high-quality upper for any shooter. The assembled item comes with the following items: Upper Receiver, Forward Assist, Ejection Port Door, Barrel Nut. 7.5" M4 Profile Barrel and A2 Flash Hider. Bolt Carrier Groups and Charging Handle options are offered in the drop down menus.

7.5" Contoured Steel Barrel

4150 Chrome Moly 1 in 7" twist rate

.223 Wylde Barrel (will safely and accurately fire both .223 and 5.56)

HPT/MPI

M4 Feed ramps

Low Profile Steel Gas Block

Stainless Steel pistol-length gas tube

Direct Gas Impingement

Mil-spec A2 Flash Hider

Free Float 7" Keymod Hand Guard

Forged Upper Receiver with Forward Assist, Ejection Door and Shell Deflector

Optional add on's:

Nitride Bolt Carrier Group (Carrier is 8620 and Bolt is 9310 MPI)

MILSPEC Charging Handles

16" 5.56 PMA Upper with 9" Keymod Rail

Pickett's Mill Armory's 16" AR15 Upper Receiver with a 9" Keymod Free Float Rail.

At Pickett's Mill Armory we go out of our way to meet every budget. This upper does just that! We assemble this piece using our uppers and a 9" thin profile Keymod rail from Matrix Arms. The value for your dollar coupled the performance on the range will exceed your expectations.

• 7075 AR15 Upper receiver with "Type II" annodizing
• PMA 16" 5.56 NATO Barrel 1-9 Twist
• Carbine Length
• A2 Flash Hider
• Matrix Arms 9" Keymod Thin Profile Rail

PMA 10.5" .223 Wylde Upper 12" MLOK Rail

Pickett's Mill Armory 5.56 NATO, AR15 Pistol Upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Barrel.
-Phosphate barrel finish
-Chambered in .223 Wylde (Fires 5.56 and .223)
-10.5" M4 Profile barrel with M4 Extension
-.750" diameter at gas block
-1/2x28 threaded muzzle/barrel
-Low Profile Steel Nitrided Gas Block with Carpenter 158 screws
-Carbine length gas system
-KAK Flash Can Muzzle Device
-12" MLOK Free Float Rail

16" 5.56 AR15 Upper Receiver Kit

Pickett's Mill Armory is excited to offer the PMA "Choose your rail" upper.

These uppers come with our outstanding parts that continue to let us lead the way in the AR15 market. Each upper comes standard with the following items:

The Pickett's Mill Armory 16" M4 Chrome Moly Upper Receiver Kit is a fully mil-spec compliant receiver that provides a high-quality upper for any level budget or shooter. This item comes unassembled with Upper Receiver, Forward Assist, Ejection Port Door, Barrel Nut. 16" M4 Profile Barrel (head spaced), Gas Block and Tube with an A2 Flash Hider and crush washer. Bolt Carrier Group and Charging Handle are available at additional cost.

The photo above is a visual representation of the items you will receive.

16" M4 Profile 4140 Chrome Moly Steel

5.56 Nato Chamber

HPT/MPI

M4 Feed ramps

Low Profile Steel Micro Gas Block

Stainless carbine-length gas tube

Direct Gas Impingement

Mil-spec A2 Flash Hider

Forged Upper Receiver with Forward Assist, Shell Deflector and coated Hard coat Type III anodizing.

FREE FLOAT RAIL OF YOUR CHOICE installed for you!

PMA 7.5" Keymod Rail Pistol Upper .223 / 5.56 with Flash Can

Pickett's Mill Armory's 7.5" Keymod Pistol / SBR upper is exactly what you need if you require maneuverability within a vehicle or other confined space.

7.5" .223 Wylde Barrel (Fires 5.56 NATO safely and accurately)
4150 CMV Steel Barrel
9" Lightweight Keymod Rail with anodized black finish
MILSPEC Upper Receiver with M4 Feed Ramps
Slim Flash Can Muzzle Device
Steel Gas Block
Steel Gas Tube

10.5" Upper Receiver with MLOK Rail .223 / 5.56

Featuring a Chrome-Moly barrel with a phosphate finish, this AR upper receiver with a MLOK rail is completely assembled and ready to pin onto your existing lower receiver. The receiver is chambered for .223 Wylde. At Pickett's Mill Armory, we take pride in selling upper receivers that are crafted from the finest materials. Each of these short-barrel rifle receivers is test-fired before shipping to ensure quality and safety.

Our .223 Wylde upper receiver features an M4 feed ramp flat-top receiver with feed ramps on both the barrel extension and the upper. The 12 inch tactical free-float M-LOK rail is designed to allow you to mount items and attachments while staying off the barrel so as not to affect harmonics thus enhancing accuracy. It has a black anodized finish that meets military specifications. Please note that this 10.5 inch upper receiver does not include a nitrided auto bolt carrier and charging handle but they can be added. Order this upper receiver today for precision, quality and safety you can count on.

Specifications:

- M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Barrel.
-Phosphate barrel finish
-Chambered in .223 Wylde
-10.5" M4 Profile barrel with M4 Extension
-1/7 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Low profile Steel gas block with carpenter 158 screws
-Carbine length gas system
-Flash Can Muzzle Device
-12" Tactical Free Float M-LOK Rail

16" 5.56 Upper Receiver 15" Keymod Rail

Pickett's Mill Armory 5.56 NATO AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-16" 4150 Chrome Moly Vanadium Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO
-.750" diameter at gas block
-1/2-28 Thread Pattern
-Steel Low profile gas block with carpenter 158 screws
-Carbine length gas system
-A2 Muzzle Device
-15" Tactical Free Float Keymod Rail

16" 5.56 CHF Upper Receiver 15" MLOK Rail

Pickett's Mill Armory 16" CHF 5.56 NATO AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-16" Cold Hammer Forged 4150 Chrome Moly Vanadium Barrel.
-Melonite Barrel finish
-Chambered in your choice of:
- 5.56 NATO or .223 Wylde
-.750" diameter at gas block
-1/2-28 Thread Pattern
-Steel Low profile gas block with carpenter 158 screws
-Mid length gas system
-A2 Muzzle Device
-15" Tactical Free Float MLOK Rail

16" 5.56 Upper Receiver 15" MLOK Rail

Pickett's Mill Armory 5.56 NATO AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-16" 4150 Chrome Moly Vanadium Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO
-.750" diameter at gas block
-1/2-28 Thread Pattern
-Steel Low profile gas block with carpenter 158 screws
-Carbine length gas system
-A2 Muzzle Device
-15" Tactical Free Float MLOK Rail

16" .300 Blackout Upper Receiver 12" Keymod Rail

Pickett's Mill Armory 16" .300 Blackout, AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping. We have sourced products from industry leading manufacturers and brought them to our facility. We then assemble the products into the uppers that you are after. 100% American Made parts!

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Vanadium Steel Barrel.
-Phosphate barrel finish
-Chambered in .300 Blackout
-16" Barrel with M4 Feed Ramps
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Steel Low profile gas block with carpenter 158 screws
-Carbine gas system
-A2 Muzzle Device
-12" Thin Keymod Rail

16" 5.56 Upper Receiver 15" MLOK Rail

Pickett's Mill Armory 16" 5.56 AR15 features an ultra thin 15" Free Float Rail Upper Receiver. These uppers are manufactured with highest quality parts available and test fired prior to shipping. The extra length on the rail provides maximum muzzle control for the shooter. We take great pride in delivering an outstanding product that anyone can enjoy!

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Barrel phosphate finish.
-Phosphate barrel finish
-Chambered in 5.56 NATO
-16" M4 Profile barrel with M4 Extension
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Low profile Steel gas block with carpenter 158 screws
-Carbine length gas system
-A2 Muzzle Device
-15" Tactical Free Float M-LOK Rail

10.5" Upper Receiver with Keymod Rail 5.56 NATO

At Pickett's Mill Armory, we take pride in selling upper receivers that are crafted from the finest materials. Each of these short-barrel rifle receivers is test-fired before shipping to ensure quality and safety.

Our 5.56 NATO upper receiver features an M4 feed ramp flat-top receiver with feed ramps on both the barrel extension and the upper. The 11-inch tactical free-float keymod rail is designed to allow you to mount items and attachments while staying off the barrel so as not to affect harmonics thus enhancing accuracy. It has a black anodized finish that meets military specifications. Please note that this 10.5 inch upper receiver does not include a nitrided auto bolt carrier and charging handle but they can be added. Order this upper receiver today for precision, quality and safety you can count on.

Specifications:

- M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 CMV Gun Barrel Steel
-Phosphate barrel finish
-Chambered in 5.56 NATO
-10.5" M4 Profile barrel with M4 Extension
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Low profile Steel gas block with carpenter 158 screws
-Carbine length gas system
-Flash Can Muzzle Device
-11" Free Float Keymod Rail

7.5" 5.56 Upper Receiver with Keymod Rail

At Pickett's Mill Armory, we take pride in selling upper receivers that are crafted from the finest materials. Each of these short-barrel rifle receivers is test-fired before shipping to ensure quality and safety.

Our 7.5" upper receiver features an M4 flat-top receiver. The 9-inch tactical free-float keymod rail is designed to allow you to mount items and attachments while staying off the barrel so as not to affect harmonics thus enhancing accuracy. It has a black anodized finish that meets military specifications. Please note that this 7.5 inch upper receiver does not include a bolt carrier and charging handle but they can be added. Order this upper receiver today for precision, quality and safety you can count on.

Specifications:

- M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-4150 Chrome Moly Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO
-7.5" M4 Profile barrel
-1/7 Barrel Twist
-1/2-28 threaded muzzle/barrel
-Pistol Gas System
-Flash Can Muzzle Device
-9" Tactical Free Float Keymod Rail

16" 5.56 Upper Receiver 12" Keymod Rail

Pickett's Mill Armory 16" 5.56 NATO, AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping. We have sourced products from industry leading manufacturers and brought them to our facility. We then assemble the products into the uppers that you are after. 100% American Made parts!

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Vanadium Steel Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO (accepts 5.56 or .223)
-16" M4 Profile barrel with M4 Extension
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Steel Low profile gas block with carpenter 158 screws
-Carbine gas system
-A2 Muzzle Device
-12" Thin Keymod Rail

16" 5.56 Upper Receiver 12" MLOK Rail

Pickett's Mill Armory 16" 5.56 NATO, AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping. We have sourced products from industry leading manufacturers and brought them to our facility. We then assemble the products into the uppers that you are after. 100% American Made parts!

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Vanadium Steel Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO (accepts 5.56 or .223)
-16" M4 Profile barrel with M4 Extension
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Steel Low profile gas block with carpenter 158 screws
-Carbine gas system
-A2 Muzzle Device
-12" Thin MLOK Rail

PMA 7.5" Pistol SBR Upper Receiver

Pickett's Mill Armory's 7.5" Keymod Pistol / SBR upper is exactly what you need if you require maneuverability within a vehicle or other confined space.

7.5" 5.56 NATO 1-7
4150 CMV Steel Barrel Phosphate Finish
9" Lightweight MLOK Free Float Rail with anodized Black finish
MILSPEC Upper Receiver with M4 Feed Ramps
KAK Industries Slim Flash Can Muzzle Device
Steel Gas Block
Steel Gas Tube

AR15 Upper Receiver 16" 5.56 MLOK

Pickett's Mill Armory 16" 5.56 NATO AR 15 Upper Receiver. PMA uppers are built with the highest quality materials and test fired prior to shipping. Our contract machine shops mill the finest parts in the industry. We bring them to our facility and then assemble the products into the uppers that you are after.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Vanadium Steel Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO (accepts 5.56 or .223)
-16" M4 Profile barrel with M4 Extension
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Steel Low profile gas block with carpenter 158 screws
-Carbine gas system
-A2 Muzzle Device
-12" Free Float MLOK Hand Guard

16" 5.56 Upper Receiver 12" MLOK Handguard

Pickett's Mill Armory 16" 5.56 NATO, AR15 upper WITHOUT bolt carrier group or charging handle. PMA uppers are built with the highest quality materials and test fired prior to shipping. We have sourced products from industry leading manufacturers and brought them to our facility. We then assemble the products into the uppers that you are after.

Specifications:
-M4 Feed Ramp Flat Top Receiver.
-Black anodized mil-spec finished upper receiver.
-Feed ramps on the barrel extension and upper.
-4150 Chrome Moly Vanadium Steel Barrel.
-Phosphate barrel finish
-Chambered in 5.56 NATO (accepts 5.56 or .223)
-16" M4 Profile barrel with M4 Extension
-1/8 Barrel Twist
-.750" diameter at gas block
-1/2-28 threaded muzzle/barrel
-Steel Low profile gas block with carpenter 158 screws
-Carbine gas system
-A2 Muzzle Device
-12" MLOK Handguard